
Christmas Tree Cake Pops Recipe tastes like a bite of frosted vanilla birthday cake dressed up in its cutest holiday outfit, with creamy frosting inside and a crisp candy shell outside. It works perfectly for busy bakers who want a fun Christmas dessert in about 1 hour of hands-on time, including decorating, and I say that as someone who once decorated cake pops at midnight while watching cheesy holiday movies. I tested this version with my kids, my neighbors, and my book club, and not a single crumb survived.
Why Choose This Christmas Tree Cake Pops Recipe
This Christmas Tree Cake Pops Recipe uses a simple boxed cake mix and canned frosting, so you skip the stress and still get bakery-style results. You shape the cake pops into little trees, dip them in candy coating, then decorate them with sprinkles that look like ornaments and lights.
You can customize the flavor with different cake mixes, frostings, or candy melts, which keeps things fun if you bake a lot during December. Kids love to help with the decorating, and adults love to eat three of them and pretend they only had one.
“These Christmas Tree Cake Pops disappeared from our cookie tray before the cookies even had a chance, and everyone asked for the recipe. ★★★★★”
Ingredients You’ll Need
Cake and frosting
- 1 box vanilla or white cake mix
- Any standard 15.25 ounce box works; I like Betty Crocker or Pillsbury.
- Ingredients listed on the cake mix box
- Usually eggs, oil, and water.
- 1 cup canned vanilla frosting
- Use a thicker style frosting; I like Pillsbury Creamy Supreme.
- You can swap in cream cheese frosting for extra tang, but keep the cake chilled longer since it softens faster.
Candy coating and decorations
- 16 ounces green candy melts
- Wilton or Ghirardelli melting wafers melt smoothly and coat evenly.
- If you cannot find green, use white candy melts and stir in oil-based candy coloring.
- 1–2 teaspoons vegetable shortening or refined coconut oil
- This thins the candy coating for easier dipping.
- Star-shaped sprinkles or candy stars
- These sit on top of each tree.
- Assorted holiday sprinkles
- Nonpareils, jimmies, and tiny sugar pearls all work.
- Optional: white candy melts or white chocolate chips
- Melt and drizzle over the trees to look like garlands or snow.
Equipment
- 9×13 inch baking pan
- Mixing bowls
- Hand mixer or stand mixer
- Baking sheet
- Parchment paper or silicone baking mat
- Lollipop sticks (about 30 to 35)
- Styrofoam block or a cardboard box with holes poked in it
- This holds the cake pops upright while they set.
- Small microwave safe bowls for melting candy
- Spoon or fork for dipping
- Small piping bag or zip-top bag for drizzling (optional)
Tips & Tricks
- Bake the cake a day ahead so it cools completely and crumbles easily.
- Crumble the cake very finely so you avoid big chunks that crack the coating.
- Add frosting a little at a time; stop when the mixture feels like playdough and holds its shape.
- Chill the shaped trees at least 20 to 30 minutes so they stay firm on the sticks.
- Dip the tip of each stick in melted candy before inserting it into the tree to glue it in place.
- Keep the candy melts warm and fluid; reheat in short bursts and stir often.
- Thin thick candy melts with 1 teaspoon shortening at a time until they flow like yogurt.
- Work with a few cake pops at a time and keep the rest in the fridge so they stay firm.
- Tap your wrist, not the stick, to shake off extra coating and avoid cake pops falling off.
- Decorate quickly while the coating still feels wet so the sprinkles stick.
- If the coating cracks, patch it with a little extra melted candy and more sprinkles.
- Use different sprinkle mixes so every Christmas Tree Cake Pops Recipe batch looks unique.
How to Make Christmas Tree Cake Pops Recipe
Bake and cool the cake
- Preheat your oven according to the cake mix instructions and grease a 9×13 inch pan.
- Mix the cake batter as the box directs, then pour it into the pan and spread it evenly.
- Bake until a toothpick in the center comes out clean, usually 25 to 30 minutes.
- Cool the cake completely in the pan, then chill it in the fridge for at least 30 minutes to make crumbling easier.
Crumble the cake and mix with frosting
- Cut the cooled cake into large chunks and place them in a big mixing bowl.
- Rub the cake between your fingers or use the mixer on low speed to turn it into fine crumbs.
- Add ½ cup of frosting and mix with clean hands or a spatula.
- Add more frosting 1 tablespoon at a time until the mixture holds together like soft clay and does not crack when you roll it.
Shape the Christmas tree cake pops
- Scoop about 1 tablespoon of the cake mixture and roll it into a ball.
- Gently pinch one side into a cone shape, then flatten the bottom so it stands up like a tiny tree.
- Repeat with the remaining mixture and line the trees on a parchment lined baking sheet.
- Chill the shaped trees in the fridge for 20 to 30 minutes or in the freezer for 10 to 15 minutes until firm but not frozen solid.
Attach the sticks
- Melt a small amount of green candy melts in a microwave safe bowl in 20 second bursts, stirring between each burst.
- Dip about ½ inch of a lollipop stick into the melted candy, then push it halfway into the bottom of a chilled cake tree.
- Stand the cake pop upright on the baking sheet and repeat with all the trees.
- Chill again for 10 to 15 minutes so the candy around the sticks sets and holds tight.
Melt and thin the candy coating
- Place the remaining green candy melts in a microwave safe bowl.
- Heat in 20 to 30 second bursts, stirring well after each burst, until smooth and fully melted.
- Stir in 1 teaspoon of shortening and check the texture; it should flow easily off the spoon.
- Add a little more shortening if needed until the coating feels smooth and pourable but still thick enough to cover.
Dip and decorate the Christmas Tree Cake Pops Recipe
- Work with 4 to 5 cake pops at a time and keep the rest in the fridge.
- Hold a cake pop by the stick and dip the tree straight down into the melted candy, then lift it out and gently tilt it to coat all sides.
- Tap your wrist lightly while you hold the stick so extra coating drips back into the bowl.
- While the coating still feels wet, add sprinkles to look like ornaments and lights, then press a star sprinkle on the very top.
Add garlands or snow details
- Melt white candy melts or white chocolate chips in a small bowl using the same short burst method.
- Spoon the melted white candy into a piping bag or zip-top bag and snip a tiny corner.
- Pipe thin zigzags or swirls around the trees to look like garlands or snowy branches.
- Place the finished cake pops into a Styrofoam block or a box with holes and let them set at room temperature until firm.
Let them set and serve
- Allow the Christmas Tree Cake Pops Recipe to sit for at least 20 to 30 minutes so the coating hardens completely.
- Check one cake pop by gently touching the coating; it should feel firm and not sticky.
- Arrange the cake pops upright in a mug, jar, or decorative stand.
- Serve them on a dessert table, pack them into treat bags, or tuck them into holiday gift boxes.
What to Serve with Christmas Tree Cake Pops Recipe
Serve Christmas Tree Cake Pops Recipe with mugs of hot chocolate topped with whipped cream and crushed candy canes. Kids love them with cold milk or warm apple cider, especially after sledding or a backyard snowball fight. Pair them with a simple fruit platter, sugar cookies, or gingerbread men for a full holiday dessert spread. They also look adorable on a hot cocoa bar next to marshmallows, candy canes, and chocolate spoons.
Storage Options
- Store finished cake pops at room temperature in an airtight container for up to 2 days if your kitchen stays cool.
- Keep them in the fridge for up to 5 days; let them sit at room temperature 15 to 20 minutes before serving so the centers soften.
- Freeze uncoated cake trees on a baking sheet, then move them to a freezer bag and store up to 2 months; thaw in the fridge before dipping.
- Freeze fully coated Christmas Tree Cake Pops Recipe in a single layer, then move them to a container with parchment between layers and store up to 1 month.
- Avoid reheating since the coating can melt; instead, serve them chilled or at room temperature.
Christmas Tree Cake Pops Recipe
Ingredients
Instructions
- Preheat your oven according to the cake mix instructions and grease a 9x13 inch baking pan.
- Prepare the cake batter as directed on the box, then pour it into the pan and spread it evenly.
- Bake until a toothpick inserted in the center comes out clean, usually 25 to 30 minutes.
- Let the cake cool completely in the pan, then chill it in the fridge for at least 30 minutes to make crumbling easier.
- Cut the cooled cake into large chunks and place them in a large mixing bowl.
- Rub the cake between your fingers or mix on low speed to turn it into fine crumbs.
- Add 1/2 cup of canned vanilla frosting and mix with clean hands or a spatula.
- Add more frosting 1 tablespoon at a time until the mixture holds together like soft clay and does not crack when you roll it.
- Scoop about 1 tablespoon of the cake mixture and roll it into a smooth ball.
- Gently pinch one side into a cone, then flatten the bottom so it stands up like a tiny tree.
- Repeat with the remaining mixture, lining the trees on a parchment-lined baking sheet.
- Chill the shaped trees in the fridge for 20 to 30 minutes, or in the freezer for 10 to 15 minutes, until firm but not frozen solid.
- Melt a small amount of green candy melts in a microwave-safe bowl in 20-second bursts, stirring between each burst.
- Dip about 1/2 inch of a lollipop stick into the melted candy, then push it halfway into the bottom of a chilled cake tree.
- Stand the cake pop upright on the baking sheet and repeat with all of the trees.
- Chill again for 10 to 15 minutes so the candy around the sticks sets and holds tight.
- Place the remaining green candy melts in a microwave-safe bowl.
- Heat in 20 to 30 second bursts, stirring well after each burst, until melted and smooth.
- Stir in 1 teaspoon of shortening and check the texture; it should flow easily off the spoon.
- Add a little more shortening if needed until the coating is smooth, pourable, and thick enough to cover the cake pops.
- Work with 4 to 5 cake pops at a time and keep the rest in the fridge so they stay firm.
- Hold a cake pop by the stick and dip the tree straight down into the melted green candy coating, then lift it out and tilt gently to coat all sides.
- Tap your wrist lightly while you hold the stick so extra coating drips back into the bowl.
- While the coating is still wet, add assorted holiday sprinkles to look like ornaments and lights, then press a star-shaped sprinkle on the top of each tree.
- Melt white candy melts or white chocolate chips in a small bowl using short microwave bursts, stirring until smooth.
- Transfer the melted white candy to a piping bag or zip-top bag and snip a tiny corner off the tip.
- Pipe thin zigzags or swirls around each tree to look like garlands or snowy branches.
- Place the finished cake pops upright in a Styrofoam block or a box with holes and let them stand until the coating sets.
- Allow the Christmas Tree Cake Pops to sit at room temperature for 20 to 30 minutes until the coating is completely hardened.
- Check one cake pop by gently touching the coating; it should feel firm and not sticky.
- Arrange the cake pops upright in a mug, jar, or decorative stand for serving, or wrap individually in treat bags for gifting.
Notes
Approximate per 1 cake pop (about 1/30 of recipe): 150–170 calories; fat 7–9 g; saturated fat 3–5 g; carbohydrates 22–26 g; fiber 0–1 g; sugars 16–20 g; protein 1–2 g; sodium 120–220 mg. Values will vary based on cake mix, frosting, candy melts, and exact portion size.
